1.4m 1.75m Automatic Poultry Manure Belt System H Chicken Cage Use
Introduction
poultry chicken manure belt, poultry quail manure belt, poultry
duck dung belt, quail dung manure belt, chicken stool belt, quail
stool belt, manure conveyor belt, polypropylene belt, manure
removal belt, manure
cleaning belt
Poultry Farm Manure Cleaning Remove Equipment Advantages
1. Manure conveyor belt for poultry dung remover is a thickened PP material, which has strong corrosion resistance, strong environmental
adaptability and long life. Moreover, the wear rate of the belt is
very low when c manure, and it can be used for ten to twenty years, which can carry
heavy objects, generally one square can carry the limit of 5000N
force.
2. The conveyor belt manure cleaning motor produced by our company
uses a cycloid reducer, and the multi-layers can be equipped with a
straight gear reducer.
3. High-carbon steel is used for the scraping mouth, and some use
high-thickness galvanized steel, which can withstand objects harder
than itself without deformation, and the scraper is well-made.
4. High working efficiency, chicken manure can be automatically
transfered out timely, avoiding overnight chicken manure infection, preventing the
occurrence of infectious diseases, automatic loading, and the
height of chicken manure can be automatically adjusted according to
the situation.
Manure Cleaning Remove System Technical Parameter
| Belt Type Manure Cleaning Remove System | Hot-dip galvanized 3mm side sheet, chain safety door with 1mm
hot-dip galvanized steel or zinc-aluminum, running speed
3m/min.Motor:1.5kw |
| Poultry Litter Cleaning Belt | PP manure belt, which has high tensile strength to ensure a long
service life.Thickness is 1.2mm. Width:1m,1.2m ,1.25m, 1.4m, 1.5m,
1.75m, 1.8m, 2.1m |
| Bracket For Poultry Dung Cleaning Belt | Hot dipped galvanized, 1.5mm thickness |
| Passive Roller | Spiral type cylinder,in the front. Anti deviation system is
included. |
| Transversal manure conveying machine | Each chicken house is with 1 set, transverse and slope conveying is
separate, the material is hot dipped galvanized; Manure belt: green
rubber belt with 8mm thickness. Power:3kw, The transverse manure
conveying system adopts rubber conveying belt. There is no leak of
manure during transportation. |
Installation Precautions
1. It is required that the chicken house must be hardened, the
ground is flat, there is no convexity and concave place, the slope
control should not exceed 2 degrees up and down. The excrement
should be 5-10 degrees lower on the other side. So that the water
can be drained smoothly.
2. Place the cages straight and adjust the foot adjuster so that
the height deviation between the two cages should not exceed 0.5
mm, and the distance between the legs should not exceed 0.5 mm.
3. Main engine should be firmly fixed, also the head and tailstock
should be firmly fixed to the ground without loosening.
4. Install manure belt or scraper, and check whether the manure
belt and the manure baffle are suitable.
5. The electrician installs the wiring and control line, and finds
the position of the travel switch, and fixes it firmly;
6. The controller must contain a leakage protection device;
7. The test running is performed by a person on the control panel
in a jog mode, and multiple persons should cooperate to ensure that
there are no scratches, jams, deflection, etc. in the equipment. If
problems are found, find out the reasons and solve them in time.
Start and run when it is confirmed that there is no error;
8. If the operation is stable, the manure removal is uniform and
there is no too much noise (less than 40 decibels). There is not
much jitter. That is qualified.
